制革机械.滚筒涂布机欧盟CE认证指令

MD机械指令：2006/42/EC

2、制革机械.滚筒涂布机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 13113:2002+A1:2010 制革机械.滚筒涂布机.安全要求

EN 13113:2002+A1:2010适用范围：

This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description): a) single and multi-roller contra-rotating machines (see Figure 2); b) single and multi-roller synchronised machines (see Figure 3); c) single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4). The machines are not intended to be used during transportation.

This standard specifies safety re for design, construction and operation. It takes account of intended use, foreseeable misuse, component and systems failure. This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part.

This document is not applicable to the roller coating machines which are manufactured before the date of its publication as EN. This standard does not establish any re for electromagnetic disturbances.

NOTE Directive 94/9/EC concerning e and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or e covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety re in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

本欧洲标准涉及以下辊涂机（说明见图2-4和规范性附录A）：A）单辊和多辊对转机（见图2）；b） 单辊和多辊同步机（见图3）；c） 单辊和多辊-反向旋转/同步机器，即所谓的组合机器（见图4）。这些机器不打算在运输过程中使用。

本标准规定了设计、施工和操作的安全要求。它考虑了预期用途、可预见的误用、组件和系统故障。本标准考虑了材料进给和搬运装置，当这些装置连接到机器上时，就成为了一个组成部分。

本文件不适用于在其发布为EN之前制造的辊涂机。本标准未对电磁干扰提出任何要求。

注：关于拟用于潜在爆炸性环境的设备和保护系统的94/9/EC指令可适用于本欧洲标准所涵盖的机器或设备类型。本标准不一定符合指令94/9/EC。为了满足指令94/9/EC，本标准未来修订版中可能需要额外的安全要求。